Drawability of Nb/Al-Ge composite has been improved by a reel-to-reel intermediate rapid quenching technique. The intermediate rapid quenching is performed at an early stage of the fabrication process ...

The drawability and the Ironability parameters of draw stages were evaluated by using following standard formulae, obtained from different literatures 21, 26, 27.

IT is difficult to assess the actual drawability of a metal sheet owing to the numerous and intricate factors involved in the deformation of the metal.

Drawability: The drawability was evaluated through the average normal anisotropy coefficient value, R, the planar anisotropy coefficient, ΔR, and Limit Drawing Ratio, LDR.

Due to rapid industrialization and the use of sheet metal for various purposes, the cold rolling mill has achieved the utmost importance. The cold rolling process runs at room temperature under oil ...

1 Department of Production and Industrial Engineering, Birla Institute of Technology, Mesra, Ranchi, India 2 Department of Metallurgical Engineering, National Institute of Technology, Jamshedpur, ...

三、拉深性能Drawability：拉深成形时，在凸缘主变形区不起皱的条件下，金属薄板在凸模圆角附近抵抗破裂的能力，见图1-2。

It is well accepted that the drawability (and therewith orientation) of UHMWPE is largely determined by the entanglement density. This research evaluates the effect of solvent quality and ...

The researchers at The Ohio State University's Center for Precision forming perform research on controlling material flow in drawing operation using CNC hydraulic cushions to help improve drawability.