A bushing permits movement between two parts without allowing them to contact each other by filling in the gap between them. When suspension bushings are worn, they don’t adequately fill the gap ...

Therefore, using a linear bushing with a long bearing length can allow for an increase in the allowable load. (Practically, this equates to longer life and improved reliability. ( [Fig. 1]) ...

A generator bushing can be the weak link in the electricity supply chain. It is generally anticipated to be maintenance free but several clues prior to failure must be watched.

Experience the precision and expertise of local workshop mechanics as they masterfully handle the bush fitting of a swing. Watch their smart techniques and attention to detail, ensuring a durable ...

At the OE level, many of the top manufacturers use a compound rubber joint as their pivot bushing of choice. This is largely due to its durability, vibration damping, and low cost to manufacture ...

The outer layers of the bushing insulation referred to as C2 is tested in guard mode as seen in Fig. 5. The current travels out the high-voltage lead to the tap. Here the current splits. But only the ...

The “threaded rod technique” consists of a simple build-a-tool that uses an oversize socket to “receive” the old bushing and another socket to push the new bushing through. In order to ...

This bushing will be available on several new Ridewell suspensions for various applications and capacities. E-mail Kristin Persson at [email protected] for more information.